Motherboard Guide

MSI X58 Pro-E review

MSI X58 Pro-E - A Mainstream Intel X58?

Compare This



The MSI X58 Pro-E

The MSI X58 Pro-E

Despite a pricing that's lower than many of its competitors, the MSI X58 Pro-E does not lack any essential features. In fact, while we were expecting some compromises to be made, that didn't seem to be the case, with this ATX board even supporting 3-way SLI or CrossFireX.

The number of SATA and DIMM slots is also comparable with several higher-end X58 motherboards and it even comes with a very convenient eSATA port at the rear I/O panel. The memory support for up to 24GB of DDR3-1600 is also decent, albeit not as high in terms of memory speed ratios as some enthusiast oriented boards. An extra JMicron JMB363 controller chip adds IDE/PATA functionality for up to two devices and a single SATA port in addition to those offered by the Intel ICH10R 'Southbridge' chip.

The only possible oversight is probably the lack of a floppy controller but we doubt most users would find that too much of an issue nowadays. This is especially so when MSI's newer motherboards including the X58 Pro-E comes with its BIOS flash utility integrated in the BIOS. Known as M-Flash, we feel that it removes the main need for a floppy for enthusiasts.

Audio support is courtesy of a Realtek ALC889 CODEC that's a common option for onboard HD audio on the better motherboards and you'll find an optical S/PDIF output at the rear panel. Obviously, it would be too much to expect dual Gigabit Ethernet controllers on motherboards of this price category and the MSI X58 Pro-E only has one, again it's from Realtek (but fortunately it uses the PCIe interface instead of the older PCI). Frankly, this is not an issue as we're usually satisfied with just one port as with most mainstream users.

MSI has squeezed quite the full complement of expansion slots on this board, with the result that the slots can be quite close to each other. Using dual-slot graphics cards on all the three PCIe x16 slots would effectively fill up all the available slots but that's expected.

Finally, like we have observed from MSI's recent motherboards, the layout of its boards has been very well taken care of and the X58 Pro-E is no different. Connectors and ports are aligned facing outwards at the edge of the board and details like having onboard switches for power, reset and Clear CMOS are convenient for users.

Strangely, MSI has added a hardware switch for setting the base clock, which is actually targeted at overclockers to quickly scale up. However, since this switch can only set certain preset frequencies, we have to wonder what's the point. After all, using the BIOS to change the base clock is the common practice now and we don't quite see how going back to traditional hardware jumpers or switches would help users.