This is an old archive page of HWZ prior to revamp. Please visit HWZ for the latest reviews and news.


» Channels :: Mainboard
Intel D845GEBV2 i845GE Motherboard
By CPU-zilla
Category : Mainboard
Published by Jimmy Tang on Monday, 7th October, 2002
Rating : 4 out of 5 stars  

Technical Specfications

Inside the box, you'll find the following items :-

  • The Intel D845GEBV2 Desktop Board
  • ATX compliant I/O shield
  • Floppy and IDE cables
  • Board and back panel I/O layout stickers
  • Quick Start Guide
  • Intel Express Installer CD

    In the installation CD, Intel bundled a number of Pentium 4 optimized software programs that lets you get started computing with your new system immediately. Some of the more useful software includes Norton Internet Security 2002 and Intel Active Monitor.

    Intel D845GEBV2 Technical Specifications
    • Socket 478 for Intel® Pentium 4 and Celeron processors
    • Intel® Pentium 4 Processors 1.4GHz - 2.8GHz or higher
    • Intel® Celeron Processors 1.7GHz - 2GHz or higher
    • Supports 400/533MHz FSB processors
    • Intel 845GE Graphics Memory Controller Hub (GMCH)
      • AGP 4x slot (1.5V only)
      • Integrated graphics controller
      • Supports 100/133MHz system bus
      • Supports 400/533MHz Intel NetBurst micro-architecture bus
      • Supports up to 2GB of DDR333 SDRAM memory
    • Intel 82801DB I/O Controller Hub (ICH4)
      • AC'97 2.2 interface
      • Six USB 2.0/1.1 ports
      • 2 channel Ultra ATA/100 bus master IDE controller
      • SMBus 2.0 support
      • Integrated Ethernet MAC
    Cache memory
    • CPU Built-in 128KB (Celeron), 256KB (Willamette) or 512KB (Northwood) L2 cache
    System memory
    • 2 x 184-pin DDR SDRAM DIMM
    • Supports 64 to 512Mb technologies for x8 and x16 devices
    • Supports 2.5V DDR SDRAM
    • Supports PC2700, PC2100 and PC1600 DDR DIMM
    • 2 x Bus Master UDMA-33, Ultra ATA-66/100 IDE ports (up to 4 devices)
    • Support for PIO, UDMA-33, Ultra ATA-66/100 IDE & ATAPI CD-ROM
    I/O Interface
    • 1x VGA port
    • 1x floppy drive interface (360KB - 2.88MB)
    • 1x serial port
    • 1x parallel port (SPP/EPP/ECP)
    • PS/2 Keyboard
    • PS/2 Mouse
    • 6x USB 2.0 ports (4x rear and 2x front via on-board header)
    • Audio ports for on-board sound (Line-Out, Line-In, Mic)
    • 3x fan connectors
    Expansion slots
    • 6x 32-bit PCI slots, PCI 2.2 compliant (support 3.3v / 5v interface)
    • 1x AGP 4x slot (1.5V only)
    Power Management
    • Supports ACPI 1.0b (Advanced Configuration and Power Interface)
    Form Factor
    • ATX Form Factor : 12" x 8.2"
    • Fits into regular ATX case (ATX 2.03 compliant)
    • 4Mbit (512KB) Flash EEPROM
    • Intel/AMI BIOS with PnP, ACPI and multi-lingual support
    • Multi-boot on ZIP, ATAPI CD-ROM, SCSI, IDE #1, #2, #3, #4
  • <<Prev | Page 2 of 9 | Next>>