This is an old archive page of HWZ prior to revamp. Please visit HWZ for the latest reviews and news.


» Articles
CeBIT 2004 Update - Part 3
By CPU-zilla
Category : Events
Published by Vijay Anand on Tuesday, 23rd March, 2004

More Goodies at Foxconn

The GDA01-P-6ELS is based on the Grantsdale-P chipset and it's equipped with a Realtek Fast Ethernet controller, a VIA VT6307 two-port 1394a controller, three PCIe x1 slots and a PCIe x16 graphics slot.

This board is almost the same as the GDA01-P-6ELS, except that it supports only DDR400 memory. Great for those who wants to keep using their older DDR400 memory modules.

The GDA03-G-6LS is based on the Grantsdale-G chipset with support for DDR400 memory. It also comes with three PCIe x1 slots, a PCIe x16 graphics slot and Fast Ethernet.

The GDA01-G-TD is one of the very first Grantsdale-G boards based on the micro-BTX form factor.

Foxconn's latest desktop casing for micro-BTX motherboards. You can see that the layout of the rear I/O and slots are slightly different.

or those who prefer micro towers, here's yet another design for micro-BTX motherboards. With BTX, you no longer install motherboards from the left panel of the casing, but from the right panel. The positions of the rear I/O panel and slots have also been switched.

Besides motherboards and casings, Foxconn will also provide coolers in order to fully give DIY’ers and system integrators a complete solution.

<<Prev | Page 2 of 11 | Next>>